tag:blogger.com,1999:blog-401164737462963207.post5254859656496121822..comments2024-03-28T00:14:10.834-07:00Comments on Ben Krasnow: Everlast 200A TIG welder: first impressions and reviewBen Krasnowhttp://www.blogger.com/profile/04234629396863486242noreply@blogger.comBlogger14125tag:blogger.com,1999:blog-401164737462963207.post-56880412423734975382018-05-11T02:23:18.548-07:002018-05-11T02:23:18.548-07:00Well, check http://welderreview.com/miller-electri...Well, check <a href="http://welderreview.com/miller-electric-welding-machines-reviews/" rel="nofollow">http://welderreview.com/miller-electric-welding-machines-reviews/</a> as well.1stReviewerhttps://www.blogger.com/profile/11954772724604473411noreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-87051322316508423582014-12-18T07:38:08.058-08:002014-12-18T07:38:08.058-08:00A friend of mine said: Hobart 200DX have arc of in...A friend of mine said: Hobart 200DX have arc of instability.<br />I'm not sure about this.<br />I used Hobart 200DX 1.5 years, it does not have any damage yet. A great machine.Jameshttp://pickwelder.comnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-17800816957338460672014-10-27T09:03:40.473-07:002014-10-27T09:03:40.473-07:00Thanks for the complete and useful review Ben... b...Thanks for the complete and useful review Ben... by the way What setup are you using on your table?Tomyhttp://google.comnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-92161296012386652082014-10-14T09:01:18.097-07:002014-10-14T09:01:18.097-07:00I have just received my new Everlast PowerTig 250E...I have just received my new Everlast PowerTig 250EX and a Power Plasma 80S,and after removing the covers and looking both of them over quite carefully I am very pleased.<br />I have ran the tig for over 2 hours so far and it welds awesome!<br />The Power plasma 80S has amazing power,and operates very smoothly.<br /> My background in welding has been as a professional welder in a job shop as well as in a manufacturing environment, for about ten years total.<br />The last 15 years I have been self employed in the electronics industry as a trouble shooter and repair technician down to the component level.<br />I now own 3 Miller machines,but now that I have experienced the performance and features of my new Everlast machines a couple of them may be for sale.<br /> You may want to check your line voltage and your connections at the location you have had two welders not work.Line voltage quality as well as a low or even a higher than normal voltage is a big problem with many inverter based power systems.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-72651159478529255582014-06-19T10:57:34.453-07:002014-06-19T10:57:34.453-07:00Good Luck. I've had two machines from Evelast,...Good Luck. I've had two machines from Evelast, each only lasted about ten minutes before quitting. Bad inverters...Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-67736444842621459942014-06-08T06:08:59.741-07:002014-06-08T06:08:59.741-07:00Thanks for the complete and useful review Ben... b...Thanks for the complete and useful review Ben... by the way What setup are you using on your table?Plasma Fanhttp://plasmacutter4sale.com/noreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-9423399870927211142013-07-21T16:54:36.467-07:002013-07-21T16:54:36.467-07:00pour faire de belle soudure il faut avoir le tungt...pour faire de belle soudure il faut avoir le tungtene le rouge pour le stanlees et le vert ou brun au zirconnium pour aluminium de l'argon et de l'helium Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-15756156103883207832013-04-26T19:41:09.994-07:002013-04-26T19:41:09.994-07:00In reference to using acetone to clean parts this ...In reference to using acetone to clean parts this fine, but hobbyists and professionals who are unaware may be temped to grab a can of brake cleaner to clean metal. If there is any liquid left in pin holes or crevises this is very dangerous. Just a tiny amount will turn into a poisonous gas that will cause severe nurological damage or death and I mean a very tiny amount. DON'T USE IT. HAPPY WELDING<br /> Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-44980850676498750132013-03-01T20:47:26.543-08:002013-03-01T20:47:26.543-08:00arc doesn't always start very easily
check t...arc doesn't always start very easily <br /><br />check this out sounds like the same problem he fixed <br /><br />https://www.youtube.com/watch?NR=1&v=UQoOP9DHJJQ&feature=endscreenAnonymoushttps://www.blogger.com/profile/03367855759283635291noreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-65418444450528841312011-02-17T23:35:36.609-08:002011-02-17T23:35:36.609-08:00Anonymous, I still have the welder and it has been...Anonymous, I still have the welder and it has been working very well over the past couple years. The machine has its quirks, though. For example, during arc welding and plasma cutting, the foot pedal must be connected to the machine to control the amperage of the operation. It's possible to adjust the foot pedal's maximum amperage setting knob, then just floor it, but the pedal must be connected and depressed for the machine to operate. I mostly use the machine for TIG welding on aluminum and stainless, so I always use the foot pedal anyway. Use the search box in my blog to search for "welding" , "fermenter", and "tig" to see some projects that I have posted.<br /><br />I have not had any problems with the machine (knock on wood). I almost always use a large gas lens setup with 3/32" tungsten. I could never understand why anyone would use a smaller gas cup or lens, or why anyone would want to use a thinner tungsten. I've tried the .040 and 1/16", but there doesn't seem to be much benefit using them on thin materials. My tig setup almost never changes for any material/thickness.<br /><br />The arc doesn't always start very easily, but this may just be a fact of life in TIG welding. I've only ever used a few different machines in my time, so I am not sure how this machine compares in arc starting. On clean aluminum, there is often a fair amount of sputtering until the arc strikes and sustains. This is not a huge problem, though. The arc usually sustains within a couple seconds, and is easy to control during welding.<br /><br />Overall, I am very happy with the machine. It cost about 1/3 of a Miller Dynasty, and also does a good job with plasma cutting. I've used all of the machine's welding/cutting modes, and it gets the job done. As with most Chinese import tools, the quality is not as good as an American brand, but it is appropriately priced, and often is all you need for hobby/semi-pro work. Good luck!Ben Krasnowhttps://www.blogger.com/profile/04234629396863486242noreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-81053946047626838422011-02-17T20:05:59.697-08:002011-02-17T20:05:59.697-08:00So after a year & 2 days from your initial pos...So after a year & 2 days from your initial post, do you still have the Everlast? just wondering if it has kept up without a hiccup. Been considering a one myself & have read many good & bad stories of these Chinese made machines. just looking for another "It is still great" or "It fried 1 month into service" <br />Thanks!Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-81209684692922416392009-10-14T23:05:35.382-07:002009-10-14T23:05:35.382-07:00cpu64, if the aluminum is forming a skin when you ...cpu64, if the aluminum is forming a skin when you apply the arc to metal, that means the metal is oxidizing. Here are some things to check:<br /><br />1. Make absolutely sure that you know what kind of aluminum you are welding. Buy some alumium that is stamped "6061", so that you know the base metal is weldable. There are some aluminum alloys that cannot be welded.<br /><br />2. Check that you are using %100 pure argon. CO2, mig gas, etc, will not work. It must be pure.<br /><br />3. For clean metal, the AC balance control can be be pretty far to the "negative" side (penetration). However if you are having a lot of problems with oxidation, try moving the balance control toward the "positive" side (cleaning). Use only AC, of course.<br /><br />4. Use only a dedicated stainless steel brush to clean your aluminum before welding. Do not use the brush to clean anything except aluminum. You may want to buy a new brush to be sure its clean.<br /><br />5. After wire-brushing, give the metal a quick wipe with acetone, then move the acetone bottle away from the welding area.<br /><br />6. Grind your tungsten on a clean grinding wheel to a sharp point. I would recommend ceriated or rare-earth tungsten. Pure tungsten and even thoriated will work, though.<br /><br />Good luck with your project, I hope this helps. Leave another comment if you have time.Ben Krasnowhttps://www.blogger.com/profile/04234629396863486242noreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-42379245933371858412009-10-14T17:44:34.103-07:002009-10-14T17:44:34.103-07:00I just borrowed a lincoln electric AC/DC tig from ...I just borrowed a lincoln electric AC/DC tig from a friend of mine. I want to build an aluminum proton pack replica from Ghostbusters.<br />I've gone through two argon refils already and I can't get it to weld. I can't get a stack, all I get is a nasty gray ashy skin anytime I try a pass. I've tried with pulse, without it, cleaned the aluminum with a brush, left it without brushing... It just doesn't work. Whatever setting I need to change, I can't find it. I'm very happy that it worked out for you right out of the box..Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-401164737462963207.post-7425023004351877092009-08-01T20:39:23.314-07:002009-08-01T20:39:23.314-07:00I bought the new Everlast 200DX IGBT. I couldn'...I bought the new Everlast 200DX IGBT. I couldn't be pleased more. It also has AC frequency to 250Hz. Amazing machine for the price: stick, AC/DC and metal sturdy pedal. Compare that to the Diversion 165 for much more and only 165 amps. No stick, no AC frequency, no flow meter but gauges, no pulse, dinky plastic pedal that you have to pay extra for and only preset adjustments. It welds amazing for stick also as my first weld with DC 7018 was just about perfect. This is my sincere remarks I would be the first to say anything negative if true. New to TIG recently got my first 'stack of dimes' look. A great welder and a steal for the money especially with the excellent customer support. I emailed them a couple of times and got almost instant replies. Bravo!!!Anonymousnoreply@blogger.com