Join me in brainstorming and building a bite force sensor that allows paraplegic musicians to smoothly control an expression pedal. This video will include construction tips and tricks, methods, material selection, and a little design philosophy.
Tiny linear potentiometer used in final design: https://www.digikey.com/en/products/detail/bourns-inc/3046L-1-103/3781580 Spring-loaded linear potentiometer: https://www.digikey.com/en/products/detail/tt-electronics-bi/404R10KL1-0/2408603 Sil-Poxy for bonding silicone rubber to itself and other materials: https://www.smooth-on.com/product-line/sil-poxy/ Sorta Clear 40 - Platinum-cure silicone molding: https://www.smooth-on.com/products/sorta-clear-40/ Light-cure 3311 adhesive: https://www.mcmaster.com/1700A253/ (expensive, but this tube will last a long time) Blue lasers on eBay "5mW" *wink* https://www.ebay.com/itm/3-Packs-900Mile-Strong-Laser-Pointer-Pen-Green-Blue-Red-Light-Visible-Beam-Lazer/174479770737 Braided shield, highly flexible, 4-conductor cable: https://www.digikey.com/en/products/detail/tensility-international-corp/30-00218/5270175 Fabric reinforced silicone sheet: https://www.mcmaster.com/8612K51/ Mechanical CAD on github: https://github.com/benkrasnow/BiteSensor Support Applied Science on Patreon: https://www.patreon.com/AppliedScience