Mathematical integration without calculus

I show how to convert an area measurement problem into a mass measurement problem that is easier to solve.  In general, this idea of converting measurement problems into different spaces is very powerful, and may prove useful in the future.

Measure the mass of an eyelash with a DIY microbalance

I built a microbalance based on a design by Paul Grohe: http://www.youtube.com/watch?v=n90whRO-ypE

It is has a precision of about 5 micrograms, and I measured a single eyelash at about 35 micrograms.  The balance is built from an analog panel meter that is controlled by a servo loop which optically monitors the meter's position. Adding mass to the meter's needle requires that the servo loop add more current to maintain the needle's position.  This additional current is read, and converted to a mass value.

Use an oscilloscope to collect optical spectral data

I'm using my new Tek oscilloscope to collect data from a DIY spectrometer.  The scope is in X-Y mode with infinite persistence.  The X axis is controlled by the rotational position of the diffraction grating in the spectrometer, and the Y axis is controlled by the photomultiplier tube, which is detecting the spectra.  In this video, I discuss the scope setup, and in future videos, I will talk more about the spectrometer, and how to use it.

Measure car engine speed RPM via the cigarette lighter

I setup my new oscilloscope to measure a car's engine speed by connecting to the cigarette lighter.  The inductive kicks from the ignition coil provide a timing signal that can be used to calculate RPM.  In this particular car (a DeLorean), the engine fires unevenly by design, so the inductive kicks are not all regularly spaced.
http://en.wikipedia.org/wiki/V6_engine

http://ranwhenparked.net/2010/09/14/what-lies-beneath-the-controversial-prv-engine-part-3/

Diffusion pump giveaway contest - ends May 31 2014

I'd like to send this diffusion pump to someone who can make good use of it.  If you are interested, please send me an email (500 words or less), or post a video (2 minutes of less) explaining what interests you about high vacuum, and what you plan to do with the pump.  I'm especially interested in folks who regularly blog or make videos about their work.

The contest will end on May 31 2014.  The order in which I receive the submissions is not important.

I may not respond to all submissions, and my decision will be final.

You will assume all liabilities and risks involved with using this equipment.  Once I send it to you, you will own it completely.

ben.krasnow@gmail.com